RING-C Cascade Rings:
The packing is designed to increase capacity, efficiency and mechanical strength in comparison to Pall rings.
Direct replacement of the widely used cascade mini ring.
SIZE: 0#,1#,1.5#,2#,2.5#,3#,4#,5#
HG/T21557.2-95
SIZE: DN16,DN25,DN38,DN50,DN76
Metal cascade mini ring is made of materials like carbon steel, stainless steel or Aluminum alloy, etc. The product has features such as thin wall, heat resistant, high free volume, high capacity, low resistance, high separation efficiency and so on. It is especially suitable for rectification towers under vacuum to treat thermosensitive, decomposable, polymerizable or cokable systems, so it is widely used in packing towers in petrochemical industry, chemical fertilizer industry and environmental protection, etc.
Type | Nominal Size | Specific Surface | Void Factor | ||
mm | inch | m²/m³ | ft²/ft³ | % | |
1 | 25 | 1 | 246 | 75,0 | 97 |
1,5 | 38 | 1-1/2 | 187 | 57,0 | 97 |
2 | 44 | 1-3/4 | 147 | 44.8 | 98 |
2.5 | 50 | 2 | 128 | 39.0 | 98 |
3 | 63 | 2-1/2 | 102 | 31.1 | 98 |
4 | 90 | 3-1/2 | 70 | 21.4 | 98 |
5 | 125 | 5 | 55 | 16.8 | 99 |
Ceramic Cascade Mini Ring with excellent acid resistance and heat resistance. They can resist to corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions. Consequently their application ranges are very wide. Ceramic Cascade Mini Ring can be used in the drying columns, absorbing columns, cooling towers, scrubbing towers in chemical industry, metallurgy industry, coal gas industry, oxygen producing industry, etc.
Type |
Size, mm |
Bulk density, kg/m3 |
Quantity pcs/m3 |
25 | 25×15×3 | 650 | 72,000 |
38 | 38×23×4 | 630 | 21,600 |
50 | 50×30×5 | 580 | 9,100 |
76 | 76×46×9 | 530 | 2,500 |
Plastic Cascade Mini Ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It was developed by British Company MTL Ltd, which also called CMR. It has not only change traditonal equal length and diameter, but also cone-shaped flanging at one edge. This special structure has shorten distance which gas passing through wall's out surface, but also reduced the resistance when air passing through bed layer and increased voidage.
Type | Nominal Size | Specific Surface | Void Factor | ||
mm | inch | m²/m³ | ft²/ft³ | % | |
1.0 | 25 | 1 | 228 | 69.6 | 90 |
1.5 | 38 | 1-1/2 | 133 | 40.6 | 91 |
2.0 | 50 | 2 | 114 | 34.8 | 93 |
3.0 | 76 | 3 | 90 | 27.5 | 93 |
4.0 | 100 | 4 | 65 | 19.8 | 94 |