Tri-Pak
Sort by:
Tri-Pak
The Tri-pack was invented by Jagger Tree. In general, the small surface of this packing is its great advantage. The excellent shape of the walls, compressed structural elements and rods, makes the Tri-pack packing the best for absorbing moisture and being able to maintain an even distribution of liquid through the packing layer.
| Article | Size (mm) |
Surface Area (m2/m3) |
Voidage | Bulk Number (n/m3) |
Bulk Density (kg/m3) |
Dry Packing Factor (m-1) |
|---|---|---|---|---|---|---|
| 1019353 | 25 | 85 | 90% | 81200 | 81 | 28 |
| 1019354 | 32 | 70 | 92% | 25000 | 70 | 25 |
| 1019355 | 50 | 48 | 93% | 11500 | 62 | 16 |
| 1019356 | 65 | / | / | 4800 | 79.2 | / |
| 1019357 | 95 | 38 | 95% | 1800 | 45 | 12 |
| Material/Performance | Density (After Injection Molding) (g/cm3) |
Operation Temperature (°C) |
Chemical Corrosion Resistance | Compression Strength (MPa) |
|---|---|---|---|---|
| PE | 0.98 | 90 | good | >6.0 |
| PP | 0.96 | >100 | good | >6.0 |
| RPP | 1.2 | >120 | good | >6.0 |
| PVC | 1.7 | >60 | good | >6.0 |
| CPVC | 1.8 | >90 | good | >6.0 |
| PVDF | 1.8 | >150 | good | >6.0 |
Sale
-27%
-23%
Low price!
-27%