DAB EVOSTA3 80/130 (1") M circulation pump with electronic control, 60186087
Products from the same category
$201
$141
In stock
$201
$141
In stock
$205
$144
Pre-order only
$242
$170
Pre-order only
$247
$173
Pre-order only
Description
DAB Evosta 3 is an electronic circulator with a “wet” rotor, designed for water recirculation in heating and air conditioning systems in domestic and residential installations.
This is the first circulator with an IPX5 protection rating. Equipped with a synchronous motor with permanent magnets and frequency-controlled electronics that automatically adapts performance to the needs of the system, ensuring energy savings and protection against water hammer.
Easy to set up: a sequential button allows you to switch between nine operating modes - three proportional pressure modes, three constant pressure modes and three constant characteristic modes.
Included - thermal insulation covers. Pump body made of cast iron with cataphoretic coating, motor body made of stainless steel.
Evosta 3 is equipped with a display that shows: head (in meters) of the selected characteristic, current power consumption (W), instantaneous head and current flow rate.
The included descaling cartridge keeps the motor shaft in perfect condition, preventing the formation of limescale deposits that can occur inside the circulator in the presence of air bubbles during initial start-up.
TECHNICAL DATA:
Operating range: 0.4–4.2 m³/h at a head of up to 8 m.
Liquid temperature range: from -10 °C to +110 °C.
Operating pressure: 10 bar (1000 kPa).
Degree of protection: IPX5.
Insulation class: F.
Installation: with horizontal motor shaft.
Standard power supply: single-phase 1×230 V ~ 50/60 Hz.
Pumped liquid: clean, free of solids and mineral oils, low-viscosity, chemically neutral, with properties similar to water (max. glycol content 50%).
Water quality: clean, free of solid or abrasive particles, non-viscous, non-aggressive, non-crystallized and chemically neutral.
Also buy with this product
Good price
