Controller AQUA AR 10 START PH-RX
Products from the same category
Description
AR 10 S pH-Rx controller for measurement and control of PH-RX.
- 0.00-14.00 pH, with an accuracy of 0.01 pH.
- Redox (redox potential), range -1500 ÷ 1500 mV, with an accuracy of 1 mV.
Digital controller AQUA AR 10 START for panel mounting 48x96.
• Backlit LCD display, 2 lines of 16 characters and 4 keyboard keys, for a simple user interface;
• 2 setpoints with independent setting and free relay outputs, selectable in On-Off mode, proportional or timed mode;
• Proportional output 0 / 4-20 mA with selectable range;
• temperature sensors PT100, level and flow sensor;
• The settings menu is password protected;
• Quick setup according to the choice of the user menu, manual control of both relays (priming of the pumps), control of the execution time of all outputs and control of the last calibration of the sensor;
• Actually n.2 is selected as setpoint or for each alarm.
• Statistics of alarms, the number of setpoint activations and the operating time of each relay;
• Self-calibration of measuring probes.
Also buy with this product
Good price
-43%
-12%
-22%
Low price!
-43%