Vacuum pump for molecular sieve regeneration GMVP 230/120 with 1450 rpm 50Hz 5.5 kW motor in explosion-proof design
Products from the same category
$12,048.72
Pre-order only
$15,663.35
Pre-order only
Description
The pumps are designed to pump dry and wet gases and can handle small amounts of liquid. They are used in applications where a vacuum of 1013 to 33 mbar is required.
During pump operation, service fluid must be supplied to replenish the liquid ring and cool the pump (usually water). The pumped liquid can be reused after the gas has been separated.
The direction of rotation is clockwise when looking at the pump from the motor side.
GÜCÜM single-stage water ring vacuum pumps have the following features:
can pump all gases and vapours;
can handle small amounts of liquid along with gases;
do not use oil and do not require lubrication;
the gases to be pumped do not come into contact with oils;
require minimal maintenance with high efficiency;
metal rotating parts do not come into contact with each other;
the shaft does not come into contact with the pumped medium;
operate with low noise and vibration;
are almost universally known
Documentation Vacuum pump for molecular sieve regeneration GMVP 230/120 with 1450 rpm 50Hz 5.5 kW motor in explosion-proof design
Download instructions, catalog for Vacuum pump for molecular sieve regeneration GMVP 230/120 with 1450 rpm 50Hz 5.5 kW motor in explosion-proof design
Also buy with this product
Good price
-30%
-20%
-23%
Low price!
-29%